The DT6507's built-in thermometer can display in either Celsius or Fahrenheit.
Press the button once to switch to Date mode (it will display a date like 101 or 1:01).
The clock requires AAA batteries to serve as a memory backup. Ensure fresh batteries are inserted so your time settings save during a power outage. dt6507 led mirror clock instructions
The DT6507 LED mirror clock is a stylish and functional time-telling device that's easy to install and operate. By following the instructions outlined in this article, you can get the most out of your clock and enjoy its features for years to come. If you have any further questions or issues, refer to the user manual or contact the manufacturer's customer support team.
An (usually a small bell or dot) will appear on the screen when the alarm is active. Handling a Ringing Alarm The DT6507's built-in thermometer can display in either
Used to change display modes and enter settings (Time, Date, Alarm). UP: Increases values and adjusts brightness. DOWN: Decreases values and enables/disables the alarm. SNZ/LIGHT (or LIGHT): Snooze button and brightness control. 2. Setting the Time (12Hr/24Hr)
This is a battery-saving feature. For a constant display, plug the clock into a USB power source. Too bright at night? Ensure fresh batteries are inserted so your time
| Problem | Solution | | :--- | :--- | | | Tap the Power icon. If bright in daytime but off at night, check for a built-in Light Sensor (cover it with a finger). | | Time resets after unplugging | The internal battery is dead. Leave the mirror plugged in for 24 hours to recharge it. | | Temperature shows "---" or wrong | The external sensor is unplugged or damaged. Check the tiny jack port on the back of the mirror. | | Buttons are unresponsive | Wipe the glass dry. Moisture causes false touches. Unplug for 30 seconds to reset. | | Bluetooth won't pair | Press and hold the Play button until you hear "Pairing." Forget the device on your phone and re-scan. |
When the alarm rings, press the on the top of the clock to pause it.
: If your clock is constantly cycling between Time, Date, and Temperature, press the DOWN button to change display modes.