The Mk6N is designed to operate maintenance-free for over 15 years, but environmental factors or grid anomalies can occasionally trigger alerts. Understanding Error Codes

The EDMI MK6N Genius is a highly advanced, polyphase electronic revenue meter used globally by utility companies and industrial facilities. This commercial and industrial (C&I) smart meter provides precision energy measurement, power quality analysis, and multi-tariff billing capabilities.

Measures up to the 50th harmonic for both voltage and current waveforms.

CT or Direct Connect) or the exact (such as Modbus or DLMS) you are using. Share public link

The EDMI MK6N belongs to the Class 0.5S and Class 1 multi-function smart meter family. It operates on a powerful 32-bit RISC processor, allowing it to perform high-speed calculations for multi-tariff, power quality, and load profiling applications. Key Technical Specifications

Available as a CT-operated (Current Transformer) meter with 1(4)A, 5(10)A, or 5(20)A configurations. Frequency: Auto-detects 50Hz or 60Hz networks.

Measures total harmonic distortion (THD), voltage sags, swells, and waveform interruptions.

Capable of holding several months of 15-minute interval data before overwriting the oldest entries. 5. Troubleshooting Common Error Codes

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

The Mk6N features an adaptable, multi-protocol communication design that fits smoothly into Advanced Metering Infrastructure (AMI) software and SCADA frameworks.

The internal non-volatile memory can be partitioned via EDMI Ezemeter or Genie software to log multiple channels at user-defined intervals (e.g., 1, 5, 15, 30, or 60 minutes). Typical configurations record: Block Demand Active / Reactive Energy (Import/Export). Average Phase Voltages. Power Factor trends. Communication Interfaces

| Symptom | Likely Cause (per EDMI documentation) | Action | | :--- | :--- | :--- | | | Power loss (Check voltage L-N) or LCD contrast drift. | Verify supply voltage; perform manual reset via disconnect switch. | | Constant red LED flash | Normal operation (Kh pulse). 3200 imp/kWh = active load. | No action needed. | | Display shows "Err 1" | Real Time Clock (RTC) battery failure. | Requires factory repair. |

The MK6N is designed for versatility and precision in revenue metering: Class 0.5S and Class 1.

. It is AMI-ready and supports Modbus, DNP3, and internal modems (GPRS/GSM). Power Quality Indication

Edmi Mk6n Genius User Manual ^new^ Jun 2026

The Mk6N is designed to operate maintenance-free for over 15 years, but environmental factors or grid anomalies can occasionally trigger alerts. Understanding Error Codes

The EDMI MK6N Genius is a highly advanced, polyphase electronic revenue meter used globally by utility companies and industrial facilities. This commercial and industrial (C&I) smart meter provides precision energy measurement, power quality analysis, and multi-tariff billing capabilities.

Measures up to the 50th harmonic for both voltage and current waveforms.

CT or Direct Connect) or the exact (such as Modbus or DLMS) you are using. Share public link edmi mk6n genius user manual

The EDMI MK6N belongs to the Class 0.5S and Class 1 multi-function smart meter family. It operates on a powerful 32-bit RISC processor, allowing it to perform high-speed calculations for multi-tariff, power quality, and load profiling applications. Key Technical Specifications

Available as a CT-operated (Current Transformer) meter with 1(4)A, 5(10)A, or 5(20)A configurations. Frequency: Auto-detects 50Hz or 60Hz networks.

Measures total harmonic distortion (THD), voltage sags, swells, and waveform interruptions. The Mk6N is designed to operate maintenance-free for

Capable of holding several months of 15-minute interval data before overwriting the oldest entries. 5. Troubleshooting Common Error Codes

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

The Mk6N features an adaptable, multi-protocol communication design that fits smoothly into Advanced Metering Infrastructure (AMI) software and SCADA frameworks. Measures up to the 50th harmonic for both

The internal non-volatile memory can be partitioned via EDMI Ezemeter or Genie software to log multiple channels at user-defined intervals (e.g., 1, 5, 15, 30, or 60 minutes). Typical configurations record: Block Demand Active / Reactive Energy (Import/Export). Average Phase Voltages. Power Factor trends. Communication Interfaces

| Symptom | Likely Cause (per EDMI documentation) | Action | | :--- | :--- | :--- | | | Power loss (Check voltage L-N) or LCD contrast drift. | Verify supply voltage; perform manual reset via disconnect switch. | | Constant red LED flash | Normal operation (Kh pulse). 3200 imp/kWh = active load. | No action needed. | | Display shows "Err 1" | Real Time Clock (RTC) battery failure. | Requires factory repair. |

The MK6N is designed for versatility and precision in revenue metering: Class 0.5S and Class 1.

. It is AMI-ready and supports Modbus, DNP3, and internal modems (GPRS/GSM). Power Quality Indication