Fagor Fi80 Dishwasher Manual

Do not raise the hood until the cycle light turns off, indicating the rinse phase is finished. Cleaning and Daily Maintenance

Turn the program dial back to the "Off" position. Wait 10 seconds. Then turn to the desired new program and press Start. The manual notes this will drain the old water first. fagor fi80 dishwasher manual

| Error Code | What It Means | Likely Cause | Simple Solutions | | :--- | :--- | :--- | :--- | | | Water Inlet Fault | The dishwasher is not getting enough water due to low pressure, a kinked hose, or a closed inlet valve. | ✔️ Open the water supply valve fully. ✔️ Inspect the water inlet hose for kinks or blockages. ✔️ Check your home's water pressure. | | F2 | Drain Error | The appliance is struggling to drain water, likely due to a blocked filter or a clogged/kinked drain hose. | ✔️ Clean the dishwasher filter thoroughly. ✔️ Check the drain hose for kinks and clear any blockages. | | F3 | Heating Error | The water is not reaching the required temperature, which may indicate a faulty heating element or thermostat. | ❌ This typically requires professional repair. ✔️ As a first step, try resetting the machine. | | F4 | Overflow Detected | Excess water has been detected, indicating a possible leak or an overfill situation. | ✔️ Clear any standing water and inspect for visible leaks around seals. ✔️ Check the drain pump and filters. | | F5 | Door Not Locking | The door latch is faulty or the door is not closing properly, preventing the cycle from starting. | ✔️ Check the door alignment and ensure nothing is obstructing the latch. | | F6 | Blocked Spray Arm | The spray arm is unable to spin freely due to debris or a blockage. | ✔️ Remove the spray arm, clean it thoroughly, and ensure it spins freely when replaced. | | F8 | Door Not Closing | The door gasket is damaged or something is preventing the door from sealing shut. | ✔️ Look for obstructions and inspect the door seal for damage. | Do not raise the hood until the cycle

Disconnect all power before servicing or installing. Then turn to the desired new program and press Start

Ultimate Fagor FI-80 Dishwasher Manual, Troubleshooting, and Parts Guide

Slide the rack into the dishwasher, close the door firmly, select your cycle time based on soil level, and press the Start button.