Programming Software Pt8100: Kirisun

The Kirisun PT8100 is a rugged, reliable mobile two-way radio widely used in commercial fleets, logistics, and public safety communications. To maximize the utility of this mobile transceiver, operators must know how to configure its frequencies, signaling, and system settings.

With the connection established, you can now read the data from the radio.

: The software is compatible with Windows; however, users may need to manually select the correct COM port in the software settings after installing the cable drivers. Access and Support

For large fleets, physically connecting each PT8100 to a PC is not always feasible. To address this, the PT8100 supports . OTAP allows a system administrator to send programming data to the radio remotely, which can be a powerful tool for updating configurations across an entire network without any physical contact with the units. kirisun programming software pt8100

This often happens due to incorrect COM port selection or poor cable connections. Verify the COM port in Windows Device Manager and ensure the cable is firmly plugged in.

: Configure up to 256 channels with specific frequencies, power levels (High/Middle/Low), and scan lists.

: Download the CPS from the Kirisun Download Center (note: some downloads may require a partner login) or use the installer provided by your vendor. The Kirisun PT8100 is a rugged, reliable mobile

Right-click the Setup.exe file and select . This ensures registry keys for COM port communication are written correctly.

Once connected, the user can perform a "Read" operation. This downloads the current configuration from the radio into the software interface, allowing the user to view and edit existing settings. Conversely, the "Write" operation uploads the edited configuration from the computer to the radio. This read/write functionality is crucial for cloning settings; if an organization purchases fifty radios, the software allows a supervisor to configure one unit perfectly and then clone those exact settings to the remaining forty-nine units in minutes. This ensures uniformity across a fleet, reducing the margin for human error during deployment.

Click on or Channel Information to open the channel grid. : The software is compatible with Windows; however,

Unzip the package if compressed, and run the setup.exe or installer application.

Connected to a stable 13.8V DC power supply. (Do not program the radio while running solely on an unstable vehicle battery).

A dedicated Kirisun mobile programming cable. This usually connects via the 8-pin microphone jack on the front panel of the radio and terminates in a USB port on your PC. A PC/Laptop: Running Windows 7, Windows 10, or Windows 11. Required Software & Drivers

Assigning specific transmit (TX) and receive (RX) frequencies.