Fi Manual English — Lambert Lx 24

| Parameter | Value | |-----------|-------| | Engine type | 4-stroke, single cylinder, OHV, EFI | | Displacement | 212 cc | | Max power | 7.5 HP @ 3600 rpm | | Max torque | 13.5 Nm @ 2500 rpm | | Fuel system | Electronic Fuel Injection (Lambert Fi) | | Starting system | Recoil (optional electric) | | Ignition | TCI with ECU control | | Recommended oil | SAE 10W-30 (above 0°C) | | Fuel consumption | ~2.0 L/hr at full load |

The heating temperature sensor is damaged or disconnected. Call a technician. Domestic Hot Water NTC Sensor Fault

If you smell gas, turn off the main gas valve immediately and call a professional. Ensure the flue pipe is not blocked or damaged. Lambert Lx 24 Fi Manual English

Part B: Installation Instructions (Qualified Technicians Only)

Lambert Lx 24 Fi Manual English: Installation, Operation, and Troubleshooting Guide | Parameter | Value | |-----------|-------| | Engine

For extended absences, turn off the electrical supply and close the main gas valve.

Flue Gas Pressure Switch. This indicates an issue with the fan or a blockage in the chimney flue. Ensure the flue pipe is not blocked or damaged

Often indicated by a flashing light or code, this may happen after a gas interruption. Press the reset button. Low Water Pressure: If the gauge falls below

Remove dust and carbon deposits from the burner assembly.

The manual provides a clear guide for daily operations. For example, it explains the reset procedure

downward slope toward the outside to prevent rain or condensate from running back into the combustion chamber. Hydraulic Connections connections. DHW Inlet / Outlet: connections. Gas Inlet: dedicated gas line connection. 5. Troubleshooting and Error Codes