Leica Tcr805 Total Station User Manual Work [ SIMPLE ]

All field data must be stored within a specific project folder, known as a "Job." Navigate to MENU > > Job . Select New (F1). Input a job name using the alphanumeric keypad. Press Set (F4) to save and set the job as active. 4. Station Setup (Orientation and Backsight)

Press the button to toggle between Prism Mode (IR) and Reflectorless Mode (RL).

Understanding the physical interface and accuracy limits ensures optimal data collection. Key Specifications : 5 arc-seconds.

Re-align the crosshairs precisely, switch to prism mode, or clean the lens with a microfiber cloth. leica tcr805 total station user manual work

Reflector Mode (IR): Used with standard prisms. This provides the highest accuracy and longest range. It is ideal for boundary surveys and high-precision construction layout.Reflectorless Mode (RL): Allows you to measure distances to almost any surface (walls, power lines, cliffs) without a prism. This is a game-changer for measuring inaccessible points or increasing speed on a busy site.

The Leica TCR805 organizes fieldwork using "Jobs." Everything you measure must be assigned to a specific job file.

Adjust the heights of the individual tripod legs to shift the bubble into the center of the circle. Do not touch the tribrach footscrews yet. All field data must be stored within a

The Leica TCR805 manual dedicates 15+ pages to setup. Here is the condensed, actionable workflow derived from those instructions.

Measures distance and angles without automatically saving the data, allowing you to preview coordinates before recording. 2. Pre-Field Checklist and Instrument Setup

Match the baud rate, parity, and data bits between your PC software and the TCR805 settings (accessible under MENU > SETTINGS > COMM ). Default settings are typically 19200 baud rate, 8 data bits, no parity. Press Set (F4) to save and set the job as active

: Use the sidecover on/off key to power the unit. Navigate menus using the alphanumeric and function keys, which correspond to softkey commands at the bottom of the screen. Data Management and Connectivity

Stakeout is the reverse of surveying; you are transferring digital coordinates from your plans onto the physical ground. Select from the Programs menu.

Turn on the instrument and use the electronic level (digitized bubble) for fine leveling. Adjust the tribrach footscrews until the tilt error is within acceptable limits (usually less than 5 seconds).