Renolink - Key Card Programming Exclusive

Keep the driver's door open during this process, especially if you have lost all existing keys. Insert Cards:

If the car uses a hands-free system, the card often needs to be placed in a specific "sweet spot" or the physical slot for the initial sync.

The card must be "virgin" (unlocked). Cards previously programmed to another vehicle cannot be reused unless they have been electronically reset. renolink key card programming

Insert your first working key card into the slot (or hold it near the start button if it is a hands-free keyless system).

: The software reads the car's UCH (Body Control Module) to extract the specific PIN code required to pair new cards. Keep the driver's door open during this process,

Click on "Learn Key/Card." The software will prompt you to enter the number of keys you wish to program (e.g., if you have one old key and one new one, enter "2"). 5. Sequence the Cards Follow the on-screen prompts carefully: Insert the first card into the reader. Wait for the software to confirm "Success." Insert the second card (the new virgin card).

The remote frequency function and the transponder chip function are separate systems on the circuit board. If the car won't start, the transponder chip inside the blank card is either incorrect for your vehicle model or the programming sequence was terminated before saving. Cards previously programmed to another vehicle cannot be

Ensure no other diagnostic software is running in the background. Check that your OBDLink SX drivers are up to date.