Sscom V5.13.1 English Version «RECOMMENDED × 2024»

Without this translation, users often miss critical features like "Hex Send," "DTR/RTS pin control," or "Newline format selection."

The Advanced Multi‑Port Monitoring & Real‑Time Data Logging feature in SSCom v5.13.1 transforms a simple serial terminal into a full‑scale, multi‑device debugging workstation—giving engineers the visibility, precision, and automation they need to troubleshoot complex embedded systems efficiently.

Allows opening multiple serial connections simultaneously for side-by-side comparative testing. How to Get Started

: The software automatically scans and identifies available COM ports, including USB-to-Serial adapters (CH340, CP2102, FTDI), saving you from digging through Device Manager. Sscom V5.13.1 English Version

Windows 7, 8, 10, or 11 (32-bit and 64-bit architectures).

At its fundamental level, SSCOM is a serial terminal emulator. It facilitates communication between a host PC and a target microcontroller (MCU), module, or peripheral via serial communication protocols—most commonly UART (Universal Asynchronous Receiver-Transmitter), but also supporting SPI and I2C with appropriate hardware bridges.

Close other serial monitors (Arduino IDE, CuteCom). On Windows, check Device Manager → Ports (COM & LPT) for the actual number. Use mode command in cmd to list free ports. Without this translation, users often miss critical features

Double-click sscom513.exe to launch the application immediately.

Connect your microcontroller (e.g., Arduino) programmed to output sensor variables. Open the port in SSCOM.

：根据目标设备的要求设置波特率（常见 9600、115200）、数据位（通常 8 位）、停止位（通常 1 位）、校验位（通常 None），点击“打开串口（Open Serial Port）”按钮。如果按钮文字变为“关闭串口（Close Serial Port）”，表示连接成功。 Windows 7, 8, 10, or 11 (32-bit and 64-bit architectures)

A: This is usually a driver issue. Ensure the drivers for your adapter (e.g., CH340, CP2102, FT232) are properly installed. You can verify this in the Windows Device Manager.

Once you have the software open, follow these steps for a basic connection:

Theoretically limited by disk and RAM. In practice, files up to 50 MB are stable. For larger files, increase the inter-byte delay.